Busbar processing machine is needed when we process high hardness or some structural objects, so the surface quality of busbar processing machine should also be maintained. How to maintain it? Look at the following five points.
1. Surface protection should be carried out during processing to avoid damage to the surface; assemblers should wear gloves when installing to prevent the surface from leaving handprints and stains.
2. Copper busbars should be made of good materials with few surface defects and uniform color.
3. Copper busbar needs to be straightened. The bending degree of broadside of copper busbar is not more than 2 mm per metre and that of narrow busbar is not more than 3 mm per metre.
4. After bending the copper bars, no obvious cracks can be found at the corner.
5. It is strictly forbidden to fill the same size copper busbar in the round hole position for repairing under the condition of punching the wrong hole in the copper busbars.
1. Surface protection should be carried out during processing to avoid damage to the surface; assemblers should wear gloves when installing to prevent the surface from leaving handprints and stains.
2. Copper busbars should be made of good materials with few surface defects and uniform color.
3. Copper busbar needs to be straightened. The bending degree of broadside of copper busbar is not more than 2 mm per metre and that of narrow busbar is not more than 3 mm per metre.
4. After bending the copper bars, no obvious cracks can be found at the corner.
5. It is strictly forbidden to fill the same size copper busbar in the round hole position for repairing under the condition of punching the wrong hole in the copper busbars.
评论
发表评论